Product Data Sheet Show all documents

Parex® Monaccel Plus

Liquid additive accelerator for one coat renders.

MONACCEL PLUS is an admixture used to reduce the initial setting time of one-coat renders.

  • Appearance: Liquid.
  • Colour: Pale yellow.
  • Density: 1.45 at ± 0.015 g/cm3
  • Solubility: Fully soluble in water. pH: 7 ± 1.5.
  • Freezing point: Approximately -20 ºC. CI ion content: ≤21 %.
  • Contains: Calcium Chloride.
Product Data Sheet Show all documents

Usage

Liquid additive accelerator for one coat renders.  

Advantages

  • Appearance: Liquid.
  • Colour: Pale yellow.
  • Density: 1.45 at ± 0.015 g/cm3
  • Solubility: Fully soluble in water. pH: 7 ± 1.5.
  • Freezing point: Approximately -20 ºC. CI ion content: ≤21 %.
  • Contains: Calcium Chloride.

Packaging

20 L container.

Product Details

Product Information

Shelf life

3 years from date of manufacture if stored in unopened original packing in frost-free, cool conditions.

Storage conditions

Dry frost free conditions 

Application

Consumption

Consumption


This information is provided as guidance only.

  • 0.5 to 1.5 L for the normal capacity of a spray render machine (mix of 6 x 25 kg bags)
Application steps

APPLICATION

  • Add MONACCEL PLUS directly to the mixing water and mix with the render. Replace 0.2 L - 0.3 L of water volume for mixing a 25 kg or 30 kg bag, with 0.2 L - 0.3 L of MONACCEL PLUS, mixing the water and MONACCEL PLUS together first before mixing with the render.
  • When MONACCEL PLUS is used, always add the same amount to all mixes used on the project and ensure that a whole facade is coated as there is likely to be a colour shade difference should the MONACCEL PLUS only be used in part of the facade mix.
  • Avoid adding more than the stated quantities as this may affect the finish, performance and colour of the render.
  • For guidance only, the setting time advantage when used at the recommended dosage rate is between 1½ to 2 hours at +5 °C. 

Documents