Parex Speedsure S Grout

6 months

Store properly in dry conditions in undamaged and unopened original sealed packaging

2210 kg/m³

Water : mortar powder = 1 : 6.66 parts by weight. (3.75 litres of water
per bag)

10mm min / 100mm max

+5°C min. / +35°C max

~10 mins

~15 mins

As a guide 1 bag yields approximately 12 litres of mixed Parex Speedsure S Grout

For each 25kg bag of Parex Speedsure S Grout, 3 litres to 3.75 litres of water are required. Single bag mixes should be prepared using a high torque slow speed drill with a Grout Stirrer. Pour the required quantity of clean water into the mixing vessel. Slowly add the Parex Speedsure S Grout to the water whilst continually mixing. Continue mixing for 1 minute untill a homogenous mix is achieved. Place grout immediately.

Parex Speedsure S Grout should be hand poured into place immediately after mixing. Continuous placing is important, pouring from one side of the formwork until the grout appears at the opposite side of the grouting area. Do not disturb once grouting has been completed before the grout has hardened.
Parex Speedsure S Grout may be placed at temperatures between 5°C and 35°C. For temperatures above 20°C care should be taken to avoid premature setting before complete placement has been achieved.

After the grout has initially hardened, remove formwork and trim edges while concrete is ‘green’. Protect the fresh material from premature drying using appropriate curing method e.g. curing compound such as Sikafloor® ProSeal ,moist geo-textile membrane, hessian, polythene sheet etc. In cold weather apply heat blankets to maintain a constant temperature.

Clean all tools and application equipment with water immediately after use. Hardened/cured material can only be mechanically removed.